SWIT BM-U Series User Manual page 17

CIE
CIE Position
CIE Blending
CIE
CIE Bright
CIE Color
Histogram
Histogram Position
Histogram
Histogram Blending
Marker
Marker Select
Horizontal*2
Marker
Vertical
Safety area
Fit Marker
Center Marker
Marker Color
Marker line type
Marker Outside
Eye
On or off
diagram *3
*1 WFM Single Line
Open waveform single-line mode, the monitor shows only one line of audio waveform. Rotate the
Menu/Enter knob to select the number of lines of audio signal to display the waveform.
(The selection range of the number of lines in a waveform depends on the current signal standard)
Y
WFM Single Line：OFF
Turn the colour gamut chart on or off
Adjusting the position of the colour gamut map on
the screen
Set the transparency of the background colour of
the colour gamut map
Set the brightness within the colour gamut map
chart
Set gamut map colours
Turn histogram on or off
Set the display position on the histogram screen
Set the transparency of histogram background color
Turn marker on or off
Set the scale of the market line
Set the X coordinate value of the marker
Set the Y coordinate value of the marker
Set safety area percentage
Set safety area to fit marker ratio or not
Switch on the center cross marker
Select a color for marker
Set the marker line display type
Marker outside color setting
Off， on
Y
940
768
512
256
64
Line:1
WFM Single Line:ON
On,Off
Top left, Top right, Bottom
left, Bottom right
Off, Low, High
Low, Medium, High
White, green, colour
OFF, ON
Top left, Top right, Bottom
left, Bottom right
OFF, LOW, HIGH
OFF, ON
16:9,15:9,14:9,13:9,4:3,2.
35:1,2:1,1.85:1,2.39： 1，
Custom1， Custom2
50%~99% （0-3840）
50%~99% （0-2160）
80%~100%
OFF, ON
OFF, ON
White, Red, Green, Blue,
Black, Gray
Type 1， type 2
OFF, Black, Gray
Eye diagram
940
768
512
256
64
17