SWIT BM-U Series User Manual page 14

5.Control—Setting for TALLY, UMD, IP control to the monitor
Menu Item
GPI Control *1
GPI 1Pin
GPI 2Pin
GPI 3Pin
GPI 4Pin
GPI 5Pin
GPI 6Pin
Tally Setting
Tally Position
F1
F2
F3
F4
F5
UMD *2
UMD Color
UMD Position
UMD Size
UMD Blending
Display Type
RS485 Address
Baud Rate
Source ID
Menu Description
Open or close GPI Control
Set the function of each
pin for GPI terminal
Open or close Tally lamp
Set the display position of On
Screen Tally Lamp
Set the control function of the
function key
Open or close UMD display
Set the color of UMD characters
Set the position of UMD characters
Set the size of UMD characters
Show the transparency of the
UMD background
Set display UMD or source
name characters
Set the location of RS485
Fixed for 115200
Set the character that the
source name displays
Value
OFF,ON
SFP, SDI1, SDI2, SDI3, SDI4, 4×SDI(2-SI)、
4×SDI(SQ), HDMI, Red Tally, Green Tally,
Yellow Tally ,Time Code, Freeze Frame, WFM
Type, WFM Single Line, UMD, Marker , Wave-
form, Audio Bar, Zebra, Vector, Low Latency
Mode, Histogram, Lissajous, Focus Assist ,
False Color
OFF, ON, Blinking
Top, Bottom
Time Code, Color Temp, Freeze Frame ,
Waveform, WFM Type, WFM Single
Line,UMD, Marker, H/V Delay, Blue Only,
Audio Bar, Zebra, Vector, Low Latency
Mode, Histogram, Odd/Even Frame ,
Lissajous, Focus Assist ,False Color, CIE
OFF, ON
White,Red,Green,Blue,Black,Gray
Top,Bottom
Large, Small
OFF, LOW, HIGH
Source ID, TSL3.1,TSL4.0
1~126
115200,8,n,1/ 38400,8,n,1/ 9600,8,n,1
A-Z, a-z, 0-9, [\]^_`{l}~@?>=<,,/.-+*.
()' &%$#' ' !
14