Digital Ports - MICRO-EPSILON thicknessSENSOR 10/200 Operating Instructions Manual

Operation
Fields with a gray
background re-
quire a selection.
Dark bordered
fields require the
Value
specification of a
value.
thicknessSENSOR
In the Preferences > Analog outputs > Analog output > Scaling menu, you
can select between Standard scaling and Two-point scaling, see
Fig. 41 Analog output - Scaling drop-down menu
Analog Output sig-
output nal
1
1/2
Output area
Scaling
Two-point
scaling
(displace-
ment and
factor)
1) Only one measuring value can be transferred.
6.4.8

Digital Ports

Go to the Preferences > Digital ports menu.
Fixed output value Output
value
Sensor 1/2: Measured value
Sensor 1/2: Intensity
Sensor 1/2: Shutter speed
Sensor 1/2: Reflectivity
thicknessSENSOR: Measured value
Inactive / 0V ... 5V / 0V ... 10V / -5V ... 5V /
-10V ... 10V / 4mA ... 20mA
Standard scaling
Two-point scaling
Start of range in mm Value
End of range in mm Value
Fig. 41.
Min to Data source can
be a sensor signal,
Max -
the result of the
value in
C-Box/2A of the
V resp.
thicknessSENSOR,
mA
or a fixed value
within the output
area.
Specification of
the analog output,
current or voltage
with selectable
value range.
Standard scaling
outputs the entire
measuring range
of the sensor/
controller.
Two-point scaling
requires the
indication of the
start and end
of the range;
value range: from
-1024 to 1024
mm.
Page 36