A 4.4 Commands; A 4.4.1 Controller Information; A 4.4.2 Search Sensor; A 4.4.3 Sensor Information - MICRO-EPSILON thicknessSENSOR 10/200 Operating Instructions Manual

Appendix | ASCII Communication with the Sensor
thicknessSENSOR
A 4.4 Commands

A 4.4.1 Controller Information

GETINFO
Querying the controller information. Output see example:
->GETINFO
Name: C-Box
Serial: 10000001
Option: 000
Article: 2420072
MAC Address: 00-0C-12-01-06-08
Version: xxx.xxx.xxx.xx
->

A 4.4.2 Search Sensor

SCAN1
The controller searches for sensors connected to the Sensor 1 socket.
The SCAN2 command causes the controller to search for sensors connected to the
Sensor 2 socket.

A 4.4.3 Sensor Information

GETINFO1
Provides information about the sensor connected to the Sensor 1 socket.
Example of a response if an ILD2300 is connected:
->GETINFO1
Name: ILD2300
Serial: 11020009
Option: 001
Article: 2418004
MAC Address: 00-0C-12-01-06-08
Version: 004.093.087.02
Measuring range: 20 mm
...
Imagetype: User
->
If the sensor was not recognized by the thicknessSENSOR, the error E39 no sensor
found is output.
The GETINFO2 command provides information about the sensor connected to the Sen-
sor 2 socket.

A 4.4.4 Read all Settings

PRINT [ALL]
Print is used to output all query commands, for each line a response with command
names in front.
- ALL: Provides further information

A 4.4.5 Language Setting

LANGUAGE BROWSER|ENGLISH|GERMAN
Language of the displayed web pages.
- BROWSER means default language
Page 58