A 4.3 Commands Overview - MICRO-EPSILON thicknessSENSOR 10/200 Operating Instructions Manual

Appendix | ASCII Communication with the Sensor
thicknessSENSOR
A 4.3 Commands Overview
Group Chapter
A 4.4.1 Chap. A 4.4.1
A 4.4.2 Chap. A 4.4.2
A 4.4.3 Chap. A 4.4.3
A 4.4.4 Chap. A 4.4.4
A 4.4.5 Chap. A 4.4.5
A 4.4.6 Chap. A 4.4.6
A 4.4.7 Chap. A 4.4.7
A 4.4.8 Chap. A 4.4.8
A 4.4.8.1 Chap. A 4.4.8.1
A 4.4.8.2 Chap. A 4.4.8.2
A 4.4.8.3 Chap. A 4.4.8.3
A 4.4.8.4 Chap. A 4.4.8.4
A 4.4.9 Chap. A 4.4.9
A 4.4.10 Chap. A 4.4.10
A 4.4.11 Chap. A 4.4.11
A 4.4.12 Chap. A 4.4.12
A 4.4.13 Chap. A 4.4.13
A 4.4.14 Chap. A 4.4.14
A 4.4.15 Chap. A 4.4.15
A 4.4.16 Chap. A 4.4.16
A 4.4.17 Chap. A 4.4.17
A 4.4.18 Chap. A 4.4.18
A 4.4.19 Chap. A 4.4.19
A 4.4.20 Chap. A 4.4.20
A 4.4.21 Chap. A 4.4.21
A 4.4.22 Chap. A 4.4.22
A 4.4.23 Chap. A 4.4.23
A 4.4.24 Chap. A 4.4.24
A 4.4.25 Chap. A 4.4.25
A 4.4.26 Chap. A 4.4.26
A 4.4.27 Chap. A 4.4.27
A 4.4.28 Chap. A 4.4.28
A 4.4.29 Chap. A 4.4.29
A 4.4.30 Chap. A 4.4.30
A 4.4.31 Chap. A 4.4.31
A 4.4.32 Chap. A 4.4.32
A 4.4.33 Chap. A 4.4.33
A 4.4.34 Chap. A 4.4.34
A 4.4.35 Chap. A 4.4.35
A 4.5 Chap. A 4.5
A 4.6 Chap. A 4.6
Short description
Controller information
Search sensor
Sensor information
Read all settings
Language setting
Synchronization
Boot the controller
Triggering
Trigger selection
Trigger level
Number of measured values to be output
Software trigger pulse
Ethernet
Setting the measured value server
Transmission rate
Save parameters
Load parameters
Factory defaults
Measurement mode
Measuring rate
Measured value averaging controller
Measured value averaging sensor
Mastering / Zeroing
Selection digital output
Output data rate
Scale output values
Error handling
Data selection for USB
Data selection for Ethernet
Function selection multi-function input
Activate error output, switching output 1
Activate error output, switching output 2
Limit values
Data selection
Output area
Two-point scaling
Send command to connected sensor
Laser off / Laser on
Find thicknessSENSOR
Error values via USB
Error values via Ethernet
Page 57