Forward The Mqtt Messages For Brk-2800 - ICP DAS USA BRK Series User Manual

BRK Series User Manual V1.0 - ICP DAS

3.1.1 Forward the MQTT messages for BRK-2800

This chapter use the DL-302 (Client) as an example, to perform "Forward the MQTT message by BRK-2800
(Broker)".
DL-302 need to set up the IP and Port of Broker Just communication, please refer to the DL-302 user
manual chapter 4.5 MQTT
(https://www.icpdas.com/web/product/download/iiot/sensor/dl-300/document/manual/DL-
300_User_Manual_v1.2.0_en.pdf)
After setting is completed, DL-302 will automatic publish message for the BRK-2800; any MQTT Client
device can subscribe to BRK-2800 to receive messages published by DL-302. Here we take the
MQTT_fx_Client as an example: enter the IP address and Communication Port of BRK-2800, and connect
to the BRK-2800 after the settings are correct.
After successfully connect, now BRK-2800 can operate publish and subscribe.
18