Hardware Connection - ICP DAS USA LinPAC-8000 User Manual

Modbus RTU／TCP Server User Manual for LinPAC / LinCon
： ： ： ：
NOTE
The LinPAC／LinCon Device Net ID must be the unique of the network.
For RTU protocol, the default COM port control setting is:
Baud rate
Parity
Data bits
Stop bits
For TCP protocol, you can use "ifconfig" command to get the IP address of
Modbus Sever.
.
Running automatically at boot time :
STEP 1 : Copy "mbserver" file to /etc/init.d of your LinPAC／LinCon
STEP 2 : Edit "mbserver" script file,
STEP 3 : Creat a symbolic link in /etc/rc2.d directory
NOTE :
Modbus server must be executed after serial port initialization.

Hardware Connection

LinPAC／LinCon Modbus Server supports Modbus RTU and Modbus TCP protocol.
For TCP protocol
You can connect modbus client and server by using the ethernet cable with RJ-45
connector.
For RTU protocol
9 pins D-sub cable is necessary. The pin assignment is :
Ver : 1.0 (2009.04)
: 115200 ,
: None
: 8
: 1
specify "mbserver10" directory and modify parameters to fit your
system.
ln –s /etc/init.d/mbserver /etc/rc2.d/S99MBServer
5 L2