System Features - Supermicro SuperStorage 5049P-E1CR45L User Manual

Table of Contents

Advertisement

Chapter 1: Introduction

1.3 System Features

The following table provides an overview of the main features of the system.
System Features
Motherboard
X11SPL-F
Chassis
SC946LTS-R1K66P1
CPU
Single Intel Xeon 82xx/62xx/52xx/42xx/32xx or 81xx/61xx/51xx/41xx/31xx processor (socket P (LGA3647)) with
up to 28 cores and a thermal design power (TDP) of up to 165W
Note: Does not support FPGA or Fabric processors
Chipset
Intel C621
Memory
Up to 512GB of RDIMM, 1TB of LRDIMM, and 2TB of 3DS LRDIMM DDR4 (288-pin) ECC memory with speeds
of up to 2933MHz in eight memory slots. Note: Memory speed depends on the processors; 2933MHz memory
speed is supported by 82xx/62xx processors only.
Expansion Slots
One PCI-Express 3.0 x4 (in x8)
Three PCI-Express 3.0 x8 (An additional x8 slot is occupied by S3108/S3008 HBA card.)
Two PCI-Express 3.0 x8 (in x16)
Storage Drives
Forty-five top-loaded hot-swap SAS/SATA 3.5" drives
Two hot-swap 2.5" SATA drives (rear)
(Optional) Two NVMe drives with rear kit
One M.2
Two SATA-DOM
Power
Redundant 1600 W; 80 Plus Platinum level
Input/Output
LAN: Two 1 Gb (Intel Ethernet Controller i210 + i210 for Dual 1G Base-T Ports); one dedicated IPMI
USB: Two USB 3.0, two USB 2.0
Serial port (COM1), an additional motherboard serial port header (COM2)
VGA port
Form Factor
4U rackmount, width: 17.2" (437mm), height: 7" (178mm), depth: 26" (660mm)
Cooling
Five 8-cm exhaust fans for redundant cooling; air shroud, CPU heatsink
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superstorage 5049p-e1cr45h

Table of Contents