Mendota AA-11-00392 Installation And Operating Instructions Manual page 50

How to Remove Door
1. Using the latch spring tool, insert the hook
end thru the hole in the left latch spring.
Turn 180 deg to disengage spring.
2. Repeat step 1 on right latch spring.
3. Pull bottom slightly away from front and lift
glass assembly up until the glass clears the
upper tabs.
Door is now free from unit.
NOTE: Always check glass gasket condition
and gasket seal any time the glass door is
removed and when reinstalling glass door.
How To Replace Door
1. Place top of glass assembly over the top
tabs and line up with the cutouts.
2. Push the bottom of door inwards.
3. Using the latch spring tool, insert the hook
end thru the hole in the left latch spring
and turn until latched to glass.
4. Repeat step 3 for right latch assembly.
5. Door is now sealed to the unit.
85-03-01116 DXV42 TIMBERFIRE
Page 50