Table of Contents
Advertisement
Lever and Mixing Bowl Protective Cover
1. After adding the ingredients lift the mixing
bowl bracket using the handle (right
drawing).
The mixing bowl lever is located on right
side of the appliance.
2. Rotate the mixing bowl lever counter-
clockwise by 180° to lift the mixing bowl
bracket.
3. To lower it, rotate the mixing bowl lever
clockwise by 180°. Pay attention to the
information next to the lever.
NOTE!
The mixing bowl holder and its protective cover are electrically connected
EN
to each other, so that the appliance only works when the mixing bowl is
placed in its holder, the protective cover is fixed correctly and the mixing
bowl holder is in its maximum raised position. After lifting the mixing bowl
using the lever the appliance may be safely switched on.
Switching the Appliance ON
1. Connect the appliance to a single grounded socket.
2. To switch the appliance on, press the ON/OFF switch
16 / 20
Installation and operation
on the control panel.
Fig. 4
101923
Advertisement
Table of Contents
