Table of Contents
Advertisement
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
5.2
Operation
EN
Risk of fingers and hands injury by rotating mixing elements!
Hands, fingers, as well as kitchen utensils may get caught by mixing
elements during operation.
Keep hands, hair and clothing away from the mixing bowl and mixing
elements.
Never insert rigid kitchen utensils into the mixing bowl through the feed
opening or through the opening of the protective cover while the appliance
is in operation. Switch the appliance off, wait for the motor to stop and
only then mix or remove ingredients from the mixing bowl.
Inserting or removing mixing elements while the motor is running can
lead to injury to fingers or hands.
Mixing elements should be replaced only after complete stop of the drive
which rotates for a short time after the power supply is switched off.
12 / 20
WARNING
Installation and operation
101923
Advertisement
Table of Contents
