Table of Contents
Advertisement
Installation and operation
Before First Use
1. Prior to first use, thoroughly clean the appliance and equipment according to
instructions in section 6 'Cleaning'.
2. To end with, dry the appliance and accessories thoroughly.
3. Install the mixing bowl and appropriate mixing elements in the appliance
according to the instructions below.
Mixing Bowl Protective Cover Installation
•
Attac h the mi xing bowl pr otecti ve c over to the protecti ve cover attac hment on the applianc e housi ng. Posi tion the pr otecti ve c over over the acc ess or y holder c huc k and fasten with two mounting scr ews provi ded.
1. Place the mixing bowl protective cover on
its attachment, located on the body of the
appliance.
2. Position the protective cover over the
accessory holder chuck and fasten with
two mounting screws (a) provided.
Mixing Bowl Installation
Before the mixing bowl installation the
appliance must be switched off and the
mixing bowl bracket must be in lower
position.
1. Place the selected mixing element in the
mixing bowl and secure it in the holder
chuck.
There are three attachment points for the
mixing bowl:
– locking pin (stud) at the back of the
mixing bowl which is inserted into
appropriate hole in the mixing bowl
bracket;
– two pins on right and left side of the
mixing bowl bracket which must snap in
the holes on the mixing bowl holders.
101923
Fig. 2
EN
Fig. 3
13 / 20
Advertisement
Table of Contents
