Installing The Fixed Arm - Kodak 9000 Installation Manual

Installing the Unit
6–8 INSTALLING THE UNIT

Installing the Fixed Arm

x1
6 mm
To install the fixed arm, follow these steps:
10. With the help of 2 persons, lift the fixed arm and attach it to the column with 4 screws with
washers (A), but do not tighten. Use the level adjustment screw (B) and the spirit level (C)
to correctly position the fixed arm; then, tighten the 4 screws with washers (A).
The Unit is now ready for the general wiring connection.
B
C
B
A
x4
10