Kodak 9000 Installation Manual page 45

3
16
6 mm
3. Place the column in a vertical position, taking care not to trap any cables between the
column and the floor. Hold the mounting bracket against the wall at the top of the column
and mark the position of the fixing holes. Move the column to one side and drill the holes.
IMPORTANT
You MUST fix the column to the wall. Use the appropriate wall fixing
system suitable for the type of wall construction.
Attach the mounting bracket to the wall and check that the column is correctly positioned
using a spirit level (A); then, screw the mounting brackets securely to the wall.
4. Mark the position of the fixing holes at the base of the column. Move the column slightly
forward to drill the holes. Place the column in position. Check that the column is correctly
positioned using a spirit level (A) and screw the base to the floor tightly.
You can use the optional base plate if:
•
The floor is inappropriate for column fixation.
•
The client requests no floor fixation.
The column is ready for the Unit head attachment.
KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01
A
x2
A
x3
4
x3
6–
Installing the Unit