Kodak 9000 Installation Manual page 30

X-Ray Room Requirement
4–8 SITE PREPARATION BEFORE INSTALLATION
Figure 4–2 Minimum X-Ray Room Space Configuration
12
3 Red color actuator emergency stop push-button
4 Red color actuator emergency stop push-button
5 Red warning lamp, power ON indicator
6 Unit mains connecting terminal
7 Green warning lamp, x-ray emission indicator
7bis X-Ray warning lamp connecting terminal
WARNING
You MUST prepare the appropriate electrical requirements and
configurations of the x-ray room before installing the Unit. You MUST
locate separately the following low voltage and high voltage connections:
- Low Voltage: (12), (9), (10)
- High Voltage: (6), (5), (7bis)
9 10 6 5 7bis
3
4 9 10
5 7
RJ45/1
RJ45/2
13
11
9 X-ray remote control
10 Door safety switch
11 Mains outlet (for electrical tools)
12 Ethernet outlet (RJ45/1)
13 Local Area Network (LAN), (RJ45/2)