Kodak 9000 Installation Manual page 47

Installing the Unit
A
x2
C
B
x1
A
7
C
8
E
x2
D
9
6 mm
9. Rotate the Unit rotating arm by hand. Screw, but do not tighten, the 2 screws with washers
located under the Unit head (D).
Relieve the weight of the head at the front with the help of 1 person. Check that the head is
correctly positioned using a spirit level (E). Tighten the 2 upper (B) and the 2 lower (D)
screws with washers of the head assembly.
The column is ready for the fixed arm attachment.
KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 6–