Table of Contents
Advertisement
www.ti.com
3 Evaluation Setups
The CC3301 BoosterPack can be used in the following configurations:
•
MCU and RTOS evaluation: BP-CC3301 + LaunchPad with the MCU running TCP/IP like the LP-AM243
•
Processor and Linux evaluation: BP-CC3301 + BP-CC33-BBB-ADAPT + BEAGL-BONE-BLACK
•
RF testing with PC tools: BP-CC3301 + LP-XDS110
In addition, the BP-CC3301 can also be wired to any other Linux or RTOS host board running TCP/IP stack.
3.1 MCU and RTOS
The BP-CC3301 can be used with a MCU running TCP/IP, like the LP-AM243 and can easily integrate with the
LaunchPad by stacking the 40 pin headers, as shown in the figure below.
SWAU130 – MARCH 2023
Submit Document Feedback
Figure 3-1. BP-CC3301 with LP-AM243
™
SimpleLink
Copyright © 2023 Texas Instruments Incorporated
®
CC3301 Wi-Fi 6 and Bluetooth
Low Energy BoosterPack
Evaluation Setups
™
Plug-
17
in Module (BP-CC3301)
Advertisement
Table of Contents
Need help?
Do you have a question about the SimpleLink CC3301 and is the answer not in the manual?
Questions and answers