Installing The Engine - Yamaha PW50W 2007 Service Manual

1
ENGINE REMOVAL
11. Remove:
9 Spark plug cap 1
9 Rear shock absorber bolt (lower/left)
12. Disconnect:
9 CDI magneto lead coupler/connector 1
13. Remove:
9 Pivot shaft 1
NOTE:
9 While removing the engine, pull out the pivot
shaft, and then remove the frame assembly.
9 Be sure to check the wire, cable and hose
disconnected.

INSTALLING THE ENGINE

w
Securely support the engine assembly so
that there is no danger of it falling over.
NOTE:
Place the engine assembly on the mainstand
so that the rear wheel is elevated.
1. Install:
9 Engine assembly
To install the frame.
5-5
ENG