Removing The Handlebar; Checking The Handlebar - Yamaha PW50W 2007 Service Manual

3
2
HANDLEBAR

REMOVING THE HANDLEBAR

1. Stand the vehicle on a level surface.
w
Securely support the vehicle so that there
is no danger of it falling over.
2. Remove:
9 Handle protector
1
9 Ignition control switch 1
9 Throttle cable
9 Throttle grip 2
NOTE:
While removing the ignition control switch, pull
back the rubber cover 3.
3. Disconnect:
9 Rear brake lever
4. Remove:
9 Grip 1
NOTE:
Blow compressed air between the left handle-
bar and the handlebar grip, and gradually
push the grip off the handlebar.

CHECKING THE HANDLEBAR

1. Check:
9 Handlebar
Bends/cracks/damage → Replace.
w
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken it.
4-17
CHAS