Yamaha PW50W 2007 Service Manual page 100

ENGINE REMOVAL
8. Install
9 Swingarm bolt (front)
9 Swingarm bolt (rear)
9 Rear axle nut
9 Rear shock absorber bolt (lower/right)
NOTE:
While apply the rear brake to tighten the rear
axle nut.
9. Install:
9 Exhaust manifold bolt
9 Exhaust chamber bolt
9 Muffler bolt
10. Install:
9 Carburetor assembly
11. Connect:
9 Fuel hose
9 Oil delivery hose 1
9 Oil hose
1
12. Install:
9 Air filter case assembly 1
13. Install:
9 Side cover
14. Bleed:
9 Autolube pump
5-7
29 Nm (2.9 m·kg, 21 ft·lb)
33 Nm (3.3 m·kg, 24 ft·lb)
60 Nm (6.0 m·kg, 43 ft·lb)
23Nm (2.3 m·kg, 17 ft·lb)
9 Nm (0.9 m·kg, 6.5 ft·lb)
18 Nm (1.8 m·kg, 13 ft·lb)
18 Nm (1.8 m·kg, 13 ft·lb)
Refer to "CARBURETOR" in chapter 6.
Refer to "SIDE COVERS SEAT AND
FUEL TANK" in chapter 3.
Refer to "AIR BLEEDING THE AUTOL-
UBE PUMP" in chapter 3.
ENG