Yamaha PW50W 2007 Service Manual page 59

FRONT WHEEL, REAR WHEEL AND BRAKE
3. Tighten:
9 Front wheel axle nut
w
Make sure the brake cable is routed prop-
erly.
cC
Before tightening the wheel axle nut, push
down hard on the handlebar(s) several
times and check if the front fork rebounds
smoothly.
4. Connect:
9 Front brake cable
at the brake camshaft lever.
5. Install:
9 Brake cable adjusting nut
6. Adjust:
9 Brake lever free play
Refer to "CHECKING
LEVER FREE PLAY" in chapter 3.
4-6
CHAS
40 Nm (4.0 m·kg, 29 ft·lb)
THE BRAKE