Removing And Installing Oil Pan - Audi A4 2015 Workshop Manual

Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
11 - Breather pipe
12 - Dust ring
13 - Gaskets
❑ Renew after removal
14 - Gasket
❑ Renew after removal
❑ Depends on model
❑ For vehicles with parking lock solenoid - N486-
15 - Mechatronic unit
❑ Removing and installing
16 - Bolts for mechatronic unit ⇒ Servicing 7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP; Rep. gr.
34 ; Mechatronic unit; Exploded view - mechatronic unit
❑ M6 × 90
17 - Bolt
❑ Renew after removal
❑ M6 × 22
❑ 3 Nm + 90°
❑ For vehicles with parking lock solenoid - N486-
18 - Seal
❑ Renew after removal
19 - Automatic gearbox control unit - J217-
20 - Oil pipe
❑ Depends on model
❑ For vehicles with parking lock solenoid - N486-
21 - Wiring
❑ Renew after removal
22 - Seals
❑ Renew after removal
23 - ATF pipe
❑ Renew after removal
24 - Seals
❑ Renew after removal
Oil pan - tightening torque and sequence
– Tighten bolts in stages in the sequence described:
Stage Bolts
1. -1 ... 25-
2. -1 ... 25-
3. -1 ... 25-
10.2

Removing and installing oil pan

Special tools and workshop equipment required
100
Rep. gr.34 - Controls, housing
⇒ "10.3 Removing and installing mechatronic unit", page 102
Tightening torque/angle specification
Screw in by hand until contact is made
3 Nm
90°