Audi A4 2015 Workshop Manual page 97

Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
Note
The ATF level can be checked at the ATF inspection and filler
♦
hole.
The ATF level is correct if a small amount of fluid comes out
♦
at the ATF inspection and filler hole when ATF temperature is
between 35 °C and 45 °C (the fluid level rises due to expansion
as it warms up).
– Place used oil collection and extraction unit - VAS 6622A- un‐
derneath.
WARNING
Risk of eye injury.
♦ Put on safety goggles.
– As soon as an ATF temperature of 35 °C is reached, unscrew/
open plug for ATF inspection and filler hole -B-.
– Allow any excess ATF to drain off.
If ATF emerges from ATF inspection and filler hole before ATF
has reached 45 ℃, ATF level is OK.
– Assemble gearbox ⇒ page 94
If no ATF emerges from ATF inspection and filler hole when ATF
has reached 45 °C, top up with ATF:
– Switch off engine and allow gearbox to cool down to 35 °C.
Caution
Risk of damage to gearbox
♦ Only the ATF available as a replacement part may be used
for dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP.
♦ Other types of oil cause malfunctions and/or failure of the
gearbox.
♦ Select correct type ⇒ Electronic parts catalogue .
♦ The hand pump for gear oil - VAS 6617- must be clean;
the ATF must not be mixed with any other types of lubri‐
cant. If necessary, rinse hand pump with ATF.
WARNING
Risk of eye injury.
♦ Put on safety goggles.
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
.
93
9. ATF