Audi A4 2015 Workshop Manual page 13

Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
♦ 1) The fault is stored and a backup programme enables the
vehicle to drive on (in some cases with restrictions). The driver
will not be made aware of the problem, as it is not critical to
driving safety or to the gearbox itself. The selector lever posi‐
tion display in the instrument cluster will continue to show the
selector lever position currently engaged in the normal way. If
at all, the driver will only notice the fault if he experiences
driveability problems, and will then automatically contact an
Audi Service Partner to identify the cause.
♦ 2) Certain positions on the selector lever position display in the
instrument cluster start to flash. This is to inform the driver that
this particular selector lever position is currently not available.
Example: position "D" is not available when the selector lever
is in position "R" and the vehicle is still rolling backwards. In
this case, selector lever position "D" will start to flash on the
selector lever position display in the instrument cluster. The
gearbox control unit prevents 1st gear from being engaged in
order to avoid damage to the gearbox. 1st gear will be engag‐
ed once the vehicle has come to a standstill.
♦ 3) The complete selector lever position display in the instru‐
ment cluster is lit up and flashing. The current selector lever
position is indicated in the instrument cluster (e.g. "D" is high‐
lighted). This is an indication that the gearbox has been over‐
loaded or the maximum temperature in the gearbox has been
exceeded (overheating), e.g. towing a load that was too heavy.
♦ 4) If the complete selector lever position display in the instru‐
ment cluster is lit up and flashing, this means that a serious
fault in the gearbox has been identified. The display in the in‐
strument cluster no longer shows the current selector lever
position. The defect is critical with regard to driving safety or
the gearbox itself. It may no longer be possible to use all gears.
The driver is made aware by the flashing gear selection indi‐
cator that he should immediately contact an Audi Service
Partner.
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
9
4. Repair instructions