Audi A4 2015 Workshop Manual page 58

Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
Caution
The gearbox control unit (mechatronic unit) can be damaged
by electrostatic discharge.
♦ Before handling electrical connectors, mechanic must dis‐
charge static. To do so, touch vehicle earth, heater radi‐
ator, or lifting platform, with your hand.
♦ Do not touch contact pins in gearbox connector with bare
hands.
– Unplug electrical connectors -1, 2, 3- and move electrical wires
clear.
– Remove bolt -1- using ring spanner insert, 16 mm - V.A.G
1332/14- and adapter - VAS 6948- .
– Pull starter off gearbox slightly but do not remove starter.
– Unscrew remaining bolts -6 ... 9- securing gearbox to engine.
– Position engine and gearbox jack - VAS 6931- with prepared
gearbox support - T40173- underneath gearbox and secure
with tensioning strap -1-.
– Remove tunnel cross member
– Detach gearbox from engine and lower carefully using engine
and gearbox jack - VAS 6931- (pay attention to electrical wiring
when doing so).
2.1.3 Removing gearbox - Q5
Special tools and workshop equipment required
♦ Hose clamps up to 25 mm - 3094-
54
Rep. gr.34 - Controls, housing
⇒ page 74 .