Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
Releasing
WARNING
Accident risk; vehicle can start rolling.
♦ Pull up parking brake button to apply electromechanical
parking brake.
– Remove lining from cup holder in centre console.
– Take release tool -2- out of vehicle tool kit.
– Insert release tool into mounting -1- for manual release mech‐
anism, as shown.
•
Release tool should be perpendicular to direction of travel.
– Turn release tool 90° -arrow A- and at the same time, press it
down -arrow B- until it engages.
•
Parking lock is now released.
Note
When the manual release mechanism for the parking lock has
♦
been operated, position "N" will be indicated in the instrument
cluster.
The following message will also appear in the instrument clus‐
♦
ter: "Vehicle may roll away! P cannot be selected. Please apply
parking brake."
Reactivating parking lock
Note
The following steps are required in order to reduce the release
force and facilitate operation:
– Press brake pedal, start engine and move selector lever
through N > D > N.
– Switch off engine, grip wrench with both hands and pull up‐
wards.
– Press brake pedal, start engine and move selector lever
through N > D > N.
Note
When the parking lock is engaged, the instrument cluster and the
selected range display - Y5- should show the position "P".
1.4.2
Manual release from position P - Q5
Note
The manual release mechanism for the parking lock must be
checked after removing and installing the gearbox, or if work has
been carried out on the manual release mechanism.
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
23
1. Selector mechanism