Table of Contents
Advertisement
The following recommendation applies in order to achieve an optimum motor heatsink
(enclosure) service life:
● Use a closed cooling circuit with stainless steel cooling unit. The heat is dissipated via a
water-water heat exchanger.
● Use ABS, stainless steel, or general construction steel for all other components, such as
pipes and fittings.
Cooling system manufacturers
ait-deutschland GmbH
BKW Kälte-Wärme-Versorgungstechnik GmbH
DELTATHERM Hirmer GmbH
Glen Dimplex Deutschland GmbH
Helmut Schimpke und Team Industriekühlanlagen
GmbH + Co. KG
Hydac System GmbH
Hyfra Industriekühlanlagen GmbH
Pfannenberg GmbH
Note
Other manufacturers
You can also use equivalent products from other manufacturers.
Responsibility for the properties of third-party products resides with the plant manufacturer.
S-1FT7 synchronous motors
Configuration Manual, 09/2018, A5E45099423B AA
Mechanical properties
www.kkt-chillers.com
www.bkw-kuema.de
www.deltatherm.de
www.riedel-cooling.com
www.schimpke.org
www.hydac.com
www.hyfra.de
www.pfannenberg.com
3.1 Cooling
43
Advertisement
Table of Contents
