Equipment; Accessory Rail With Plastic Hooks; Fig. Accessory Rail With Plastic Hooks (On Side); Fig. Accessory Rail With Plastic Hooks (At Head End) - LINET Sprint 200 Instructions For Use Manual

17 Equipment

Product equipment depends on product configuration.

17.1 Accessory Rail with plastic hooks

CAUTION!
It is not recommended to place the hooks suspended on the accessory rail and the accessories suspended on
these hooks directly above the pedals on the sides of Sprint 200 in order to facilitate the use of pedals during
stretcher height adjustment and the use of brake pedals during stretcher transport!
Accessory rail with 4 plastic hooks is intended for hanging accessories.
It is located on the sides of stretcher or at head end / foot end.
Power Supply Cord in safety position must be wound around the Accessory Rail at head end in the case of Sprint 200 with scales
or with i-Drive Power.
Maximum load of the Accessory Rail is 10 kg without leverage.
Maximum load of the plastic hook intended for the Accessory Rail is 2 kg.

Fig. Accessory Rail with plastic hooks (on side)

90

Fig. Accessory Rail with plastic hooks (at head end)

D9U001ES2-0101_05