Cleaning And Disinfection - LINET Sprint 200 Instructions For Use Manual

Emergency stretcher
Table of Contents

Advertisement

20 Cleaning and Disinfection

WARNING!
Risk of injury due to incorrect preparation!
Ensure pedals will not be pressed accidentally during cleaning.
Ensure the Sprint 200 with scales or with i-Drive Power is disconnected from the mains before clea-
ning the Sprint 200 with scales or with i-Drive Power.
WARNING!
Risk of environmental pollution!
If oil leaks from hydraulic units or gas springs contact the manufacturer´s service department!
WARNING!
Use only a damp cloth or a wet wipe to clean the Power Supply Cord and the place of connection of the Power
Supply Cord to the undercarriage cover!
CAUTION!
Material damage due to incorrect cleaning/disinfection!
Do not use washing tunnels to clean the stretcher.
Do not use pressure or steam cleaners.
Follow the instructions and observe the dosages recommended by the manufacturer.
Ensure that disinfectants are selected and applied exclusively by qualified hygiene experts.
Respect used materials during cleaning and desinfection! For information see the following table.
Check if used cleaning agents and disinfectants are compatible with materials that the product con-
sists of! For information see the following table.
D9U001ES2-0101_05
125

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sprint 200 and is the answer not in the manual?

Table of Contents

Save PDF