Table of Contents
Advertisement
4.4.19 DNM100_RemoveDevice
Description:
This function is used for removing the specified slave device from the
ScanList in the PISO-DNM100. And the information of the device in
EEPROM is erased at the same time.
Syntax:
DWORD DNM100_RemoveDevice (BYTE BoardNo, BYTE DesMACID)
Parameter:
BoardNo: [input] PISO-DNM100 board number (0~15)
DestMACID: [input] The remote slave device's MAC ID (0~63)
Return:
DNM100_NoError (0): OK
DNM100_DriverError (10001): Kernel driver is not opened.
DNM100_ActiveBoardError (10002): This board can not be activated or
DNM100_BoardNumberError (10003): BoardNo exceeds the current
DNM100_TimeOut (10023): The PISO-DNM100 has no response.
Others: Please refer to Table 4.2.2 ~ Table 4.2.9.
PISO-DNM100 DeviceNet Master API functions User's Manual (Ver: 1.0)
kernel driver can not be found.
scanned total board number.
2008/02/25
80
Advertisement
Table of Contents
