Dnm100_Stopalldevice - ICP DAS USA PISO-DNM100-D User Manual

4.4.17 DNM100_StopAllDevice

Description:
This function is used to stop to communicate with all destination
devices in ScanList.
Syntax:
DWORD DNM100_StopAllDevice (BYTE BoardNo)
Parameter:
BoardNo: [input] PISO-DNM100 board number (0~15)
Return:
DNM100_NoError (0): OK
DNM100_DriverError (10001): Kernel driver is not opened.
DNM100_ActiveBoardError (10002): This board can not be activated or
DNM100_BoardNumberError (10003): BoardNo exceeds the current
DNM100_TimeOut (10023): The PISO-DNM100 has no response.
Others: Please refer to Table 4.2.2 ~ Table 4.2.9.
PISO-DNM100 DeviceNet Master API functions User's Manual (Ver: 1.0)
kernel driver can not be found.
scanned total board number.
2008/02/25 78