Table of Contents
Advertisement
Table 4.2.5 Interpretation of the return code (EEPROM Error) 1/1
R eturn
T
Code
T
DNMXS_ReadEEPROMError
1 400
T
T
DNMXS_WriteEEPROMError
1 401
T
T
DNMXS_EEPROMDataError
1 402
T
T
DNMXS_EEPROMFull
1 403
T
T
DNMXS_DeviceNotExistInEEP
1 404
T
T
1 405
DNMXS_EEPROMDeviceDuplicate
T
T
DNMXS_EEPROMError
1 406
T
T
1 407
DNMXS_EEPROMNoData
T
T
Table 4.2.6 Interpretation of the return code (CAN port Error) 1/1
R eturn
C AN chip Error
T
Code
T
T
DNMXS_SendCANMsgError
1 500
T
T
1 501
DNMXS_CANConfigError
T
T
DNMXS_CANRxBufferError
1 502
T
T
1 503
DNMXS_CANInstallIRQError
T
T
PISO-DNM100 DeviceNet Master API functions User's Manual (Ver: 1.0)
E EPROM Error
T
T
T
C omment
T
There are errors when reading
EEPROM.
There are errors when writing
EEPROM.
The data in EEPROM is error.
The EEPROM is full.
The data can't be found in the
EEPROM.
The device already exists in the
EEPROM.
The EEPROM has some errors.
The EEPROM is empty.
C omment
T
The CAN port can't send message.
The CAN port can't be configured.
The receive buffer has errors in the
CAN port.
There are errors when installing the
interrupt resource.
2008/02/25
T
T
50
Advertisement
Table of Contents
