D Emo Programs For Windows; Abrief Introduction To The Demo Programs - ICP DAS USA PISO-DNM100-D User Manual

5. Demo Programs for Windows
All of demo programs will not work normally if PISO-DNM100 driver would
not be installed correctly. During the installation process of the driver, the
install-shields will register the correct kernel driver to the operation system and
copy the DLL driver and demo programs to the correct position based on the
driver software package you have selected (Win98,Me,NT,win2000,XP). After
completing the driver installation, the related demo programs, development
library and declaration header files for different development environments are
installed in the system as follows.
The PISO-DNM100's root directory is C:\ICPDAS\PISO-DNM100
|--\DLL
|--\Driver
|--\Manual
|--\Utility
|--\Demo
|--\Demo\BCB 6
|--\Demo\VC++ 6
5.1 A brief introduction to the demo programs
VC_Demo1 : Demonstrate the basic functions to communicate with the remote
slave device. The demo program will lead you step by step to
complete the setting and communication.
VC_Demo2 : Demonstrate the scan function to scan all the remote slave
devices in the same DeviceNet network. The demo program will
show you all the slave devices and their I/O connection type.
BCB_Demo1 : Demonstrate the scan function and add/remove function to
configure the information of the remote slave device.
BCB_Demo2 : Demonstrate the I/O functions to access the I/O data of the
remote slave device. The demo program will show you the input
value of the remote device and let you send out the data to the
output pins of the remote slave devices.
PISO-DNM100 DeviceNet Master API functions User's Manual (Ver: 1.0)
The DLL driver for the user's application
The window driver of the PISO
The user manual of the P
The DeviceNet Master utility
Demo program
Demos for Borland C++ Builder 6
Demos for Visual C++ 6
-DNM100
ISO-DNM100
2008/02/25 128