I/O Wiring Procedures - Omron SYSMAC CPM2B-S001M-DRT Operation Manual

Wiring and Connections
3-5-2
Removing and Wiring I/O Terminal Blocks
Removing and Wiring I/O Connectors
MIL Flat Cable Connector
Downloaded from Elcodis.com electronic components distributor
The following diagram shows how to wire the power supply.
Note Do not perform a voltage withstand test on the DC power supply terminals.
The test might damage the PC's internal components.

I/O Wiring Procedures

The output terminal specifications are provided below.
The following tables provide specifications of compatible OMRON I/O connec-
tors.
24 V DC
CPM2B-S CPU Board
Input connector
(32 inputs)
Strain Relief
Socket
Note The max. rated current for flat cable is 1 A. Be sure that the
current at the common terminal does not exceed 1A.
Section 3-5
The power supply terminal
block is removable.
0 V
I/O connector
(6 inputs and 4 outputs)
Output connector
(32 outputs)
41