5.2 Installation of a cold water kit
You can connect this cold water conversion kit to the Bolero 32, 33, 42 and 43 to serve hot water and cold water.
The cold water kit must be installed with a cold water unit.
Cold Water Pulse (CWS) is a connection that triggers an external device to dispense cold water.
Necessities:
• cold water conversion kit 7.270.215.101
• cold water unit
• Philips screwdriver
5.2a
5.2b
5.2c
A
B
• screwdrivers torx 10 and 15
• curved nose pliers
• protecting gloves
Step 1
► Always unplug the machine to turn off the power
before opening it.
• pre-assembly connection parts
Step 2
• pre-assembly hoses
• secure the hose with clip
• do not forget the hose clamp
► One piece of insulation has not been used here yet,
but will be used later in step 7.
Step 3
• turn off the water tap
• disconnect the connecting hose from the machine
• remove the back panel
• remove bracket with mainboard to create a
throughput
A
B
29