Warnings And Errors; Warnings - BRAVILOR BONAMAT Bolero Series Technical Manual

3. Warnings

and
3.1 Warnings
code description
W001 temperature sensor out of range
W002 temperature too high
W003 temperature not rising while
relay engaged
W004 canister motor not detected
W005 not used
W006 mixing cups must be rinsed
W007 machine must be descaled soon
W008 machine must be descaled now
W009 water filter must be changed
soon
W010 water filter must be changed now • reset the message on the screen
M011 payment device connection
successful
W012 payment device connection failed • no direct action required, disappears after a few seconds
W013 -
not used
W019
W020 A message that shows up when
relay life (integrated on the I/O
board) is almost over.
► Using the Energy control function (Eco mode) will reduce the amount of switching of the relay and will
extend the life time.
10
errors
action
• no action required, disappears after a few seconds, becomes
• no action required, disappears after a few seconds
• no action required, disappears after a few seconds, becomes
• reset the message on the screen
• reset the message on the screen
• reset the message on the screen
• reset the message on the screen
• reset the message on the screen
• no action required, disappears after a few seconds
• reset the message on the screen, the message will recur
after 3 incidents E002
E004 after 3 incidents within certain time
» if the warning persists, contact your dealer
» rinse the mixing system, see "Rinse mixing system" in de
user manual
» schedule the descaling procedure soon
(the warning will pop-up after every dispensed beverage)
» descale the machine, see "Descale" in de user manual
» schedule water filter replacement soon
(the warning will pop-up after every dispensed beverage)
» replace the water filter and confirm in "Water filter
management" in de user manual
» check the connections and restart the payment device
» if the error persists, contact your dealer
several times after which it becomes E026