Installation Requirements - BRAVILOR BONAMAT Bolero Series Technical Manual

1. Installation requirements

To enable a smooth and simple installation of the Bolero machines please ensure the customer has the
following prepared:
• Ensure the electrical supply is situated within 1 meter of the machines proposed location.
• Ensure the power supply is correct for the ordered machines:
• Bolero 11 / 21 / 32 / 33 / 43
» 230V, 2230W, 13amp (or higher).
• Bolero 11 / 21 3KW
» 230V, 3100W, 14amp (or higher).
• Ensure that the machine fits the proposed location.
• The water supply must be cold potable (drinking) water terminating in a shut off valve with a male 3/4"
connection. This must be within 1 meter of the machines proposed location.
• The water pressure must be between 1 - 10 bar.
NOTE: Water pressure must be measured as standing pressure AFTER any fitted water filtration.
What the engineer can do:
• Upon arrival the fully trained engineer will complete the following;
• Unpack the machine and inspect for transit damage.
• Install the machine in the proposed location.
• Connect the power and water supply to the machine.
• Connect a water filtration system if ordered.
• Commission the machine and complete a function test ensuring full operation.
• Set the machine up to a standard recipe if no pre set recipe has been specified in advance.
• Make adjustments to beverages taste and size (based on the person on site presented as the management
representative).
• Check if the water volume dosage is correct, if not, a calibration must be performed.
• Train staff on machine maintenance, cleaning and operation.
• Leave the area tidy .
Ingredients you may need:
» Ingredients should be selected based on taste profiles and site requirements.
» Only use instant ingredients that are suitable for vending machines (contains a flowing agent ).
» Use the recommended dosage as indicated on the packaging.
► Always follow the local and national safety regulations and standards for electrical devices during installation.
► The contents of the safety booklet supplied with the machine must be known to both the engineer and the customer.
► The operator instructions can be downloaded from the Bravilor Bonamat website.
1