Remove The Service Panel - Hmi Board (Bolero 32, 33, 42 And 43); Remove The Service Panel - Hmi Board (Bolero 11 And 21) - BRAVILOR BONAMAT Bolero Series Technical Manual

2.2 Remove the service panel - HMI board
2.3 Remove the service panel - HMI board
B
C
C
D
B
A
C
D
(Bolero 32, 33, 42 and 43)
Step 1
• open the door
• remove the print cover, see
• remove the wiring
• carefully disconnect the flat cable of the touchscreen
A
A
► Do not remove flat cable of the display
Step 2
• remove the 2 screws of the service panel
• pull the service panel towards you
► See also the additional information in section
Replacing HMI board on p.46
(Bolero 11 and 21)
Step 1
• open the door
• remove the print cover
• remove the wiring
• carefully disconnect the flat cable of the touchscreen
A
► Do not remove flat cable of the display
Step 2
• remove the screw of the service panel
• pull the service panel towards you
► See also the additional information in section
Replacing HMI board on p.46
section 2.1
B
C
D
7.2
B
C
D
7.2
3