Other Problems (Dealer) - BRAVILOR BONAMAT Bolero Series Technical Manual

3.4 Other problems (dealer)
In addition to the messages and errors present in the machine, a number of other problems may occur; these
problems are described below.
Problem description
beverage to weak
beverage to strong
cup to full
cup not full enough
no water dosed
mixing chamber clogs up
mixing chamber
overflows water
mixing chamber leaks
not enough foam on the
beverage
to much foam on the drink
16
Possible cause
almost out of powder in ingredient
canister
strength not correct
strength not correct
drink volume not setup correct
drink volume not setup correct
water level too low
hose blocked, scale
to much powder
pump calibration not correct
mixer defect or missing
mixing chamber damaged
hose blocked
fan not running
powder used which is not applicable for
vending machines
water selector gives water in wrong outlet
(only applicable on Bolero 32, 33, 42 and 43)
pump calibration not correct
mixing chamber clogged up
mixing chamber seal leaks
mixing chamber defect
mixer speed not correct
type of instant ingredient
mixer not on the mixer motor
mixer motor defect
mixer speed not correct
Check the following
• Ingredient container
• adjust drink settings in the recipe
editor
• adjust drink settings in the recipe
editor
• adjust drink settings in the recipe
editor
• adjust drink settings in the recipe
editor
• float
• all related hoses
• check the advise dosing of the
packaging of the powder, use a
scale to weight the amount of
powder used
• calibrate the pump
• mixer
• mixing chamber
• all related hoses
• fan
• use powder that is applicable for
vending machines
• water selector
• calibrate the pump
• mixing chamber
• seal mixing chamber
• replace mixing chamber
• adjust mixer speed
• try a different instant ingredient
• place mixer
• mixer motor
• adjust mixer speed