Remove The I/O Board (Bolero 32, 33, 42 And 43); Remove The Inlet Valve; Reset The Temperature Safety Switches (Bolero 32, 33, 42 And 43); Reset The Temperature Safety Switches (Bolero 11 And 21) - BRAVILOR BONAMAT Bolero Series Technical Manual

2.7 Remove the I/O board
A

2.8 Remove the inlet valve

B
A A
2.9 Reset the temperature safety switches
A
2.10 Reset the temperature safety switches
A
(Bolero 32, 33, 42 and 43)
Step 1
• remove the back panel as in Step 1
• disconnect the wiring
• remove the mainboard
Step 1
• remove the back panel as in Step 1
Step 2
• disconnect the wiring
• disconnect the hoses
• remove the 2 screws
• remove the inlet valve
Step 1
• remove the back panel as in Step 1
A
Step 2
► Be careful some boiler parts can be hot.
• push both red switches
Step 1
• remove the back panel
A
Step 2
► Be careful some boiler parts can be hot.
• push both red switches
► If necessary, loosen the hoses to make room.
A
of the valve bracket
A
B
(Bolero 32, 33, 42 and 43)
to reset
A
(Bolero 11 and 21)
to reset
A
of section 2.4
of section 2.4
of section 2.4
7