These machines are specially designed read this manual carefully. for making hot beverages Model Bolero 20 is suitable for various types of coffee, such as regular coffee, decaffeinated coffee, etc. This model is equipped with a plastic worm and a motor running at 116 rpm for both ingredient containers.
∆ The manufacturer accepts no liability for • All repairs must be performed by the any damage resulting from installation, Bravilor Bonamat dealer or a skilled and use or maintenance that is not in authorised expert. compliance with this manual.
1.4 A quick machine guide The double page presents the most 1.4.1 CCESSORIES important parts of the machine. Keep this • Glass decanter double page unfolded & while reading • Renegite this instruction manual. • Funnel • Water connection hose 1.
1.5 Installing the machine and setting up for operation 1. Place the machine on the work 16. The version number of the machine surface. Leave a minimum of 6 cm appears briefly in the display (11). clear on the right-hand side so that the (Inform the engineer of this number in door (10) can be opened.
1.6 Settings The machine is equipped with a program 8. § 1.10.4 Switching the mixer on or off that allows you to set all the facilities of when tapping cups for the beverage the beverage maker. The program under the left-hand start button. comprises fifteen components in the 9.
1.7 General programming procedure 1.7.1 1.7.3 N GENERAL LOSING THE SETTINGS PROGRAM Before you start programming, remember 1. If you have finished setting up the which settings have to be changed. program, press the programming Make a note of the settings you wish to button (3) on the inside of the door change.
1.8 Step-by-step programming CARE! Water that is leaving the hose 1.8.1 TARTING THE RINSING PROGRAM may be hot! 8. Remove the drain plug of the drain hose (5) to allow the water out into the drain or the bucket. 9. Replace the plug on the hose. 10.
1.9 Step by step programming (continued) 24. Halt the descaling program 1.9.1 ETTING THE QUANTITY OF BEVERAGE immediately after point 5: PER CUP FOR THE BEVERAGE UNDER Within 5 seconds: THE LEFT HAND START BUTTON Fig. 7 Fig. 8 The descaling program can be 1.
1.10 Step by step programming (continued) In the case of model Blr21-001, this is 1.10.1 S ETTING THE STRENGTH OF THE suitable for milk powder and chocolate. BEVERAGE PER CUP FOR THE BEVERAGE In the case of Blr20-001 (for coffee), we UNDER THE LEFT HAND START BUTTON recommend changing this setting to 7.
1.11 Step by step programming (continued) 3. Press the right-hand side of the ß (13) to switch the setting key mixer on, see fig. 15. The default setting is: ON. 1.11.2 S ETTING THE QUANTITY OF BEVERAGE Fig. 13 PER DECANTER OR SWITCHING OFF THE DECANTER OPTION FOR THE BEVERAGE UNDER THE LEFT HAND START BUTTON...
1.12 Step by step programming (continued) 1. Select program “Switching the mixer 1.12.1 S ETTING THE QUANTITY OF BEVERAGE on or off” for the beverage under the PER DECANTER OR SWITCHING OFF THE left-hand start button. Figure 21 DECANTER OPTION FOR THE BEVERAGE appears in the display.
1.13 Step by step programming (continued) 1.13.1 S 1.13.2 S ETTING THE WATER TEMPERATURE ETTING DESCALING SIGNAL Fig. 25 Fig. 26 1. Select program 'setting descaling 1. Select program 'setting the water signal', see figure 26. temperature'. Figure 25 appears in −...
1.14 Usage 1. Insert the plug into an earthed wall 15. Place an open and empty decanter socket. under the beverage outlet (14) when 2. Open the door (10) on the left-hand the whole or half-decanter setting is side with the key (19). selected.
1.15 Maintenance It goes without saying that the machine 1. Remove the mixer (4.6) at the and the accessories have to be kept same time as the base plate thoroughly clean. (4.7) by turning it to the right and pulling it forward. 2.
1.16 Descaling When this descaling signal is activated PRECAUTIONARY MEASURE (fig. 1 appears in the display), the • Stay with the machine throughout the descaling program § 1.8.2 must be started soon. descaling process. • Wear gloves and a facial protector Before descaling read the instruction while descaling.
If the machine needs to be opened, e.g. help to resolve the problem, consult your in the case of repairs, the plug must first Bravilor Bonamat dealer, your service be removed from the wall socket! engineer or one of the service centres.
Page 20
Blr020-001/Blr021-001 - 16 A Model : ........Type : 8 . Vlgnr. : .......VHH ....V 50/60HZ....W L= ± 120 cm min. 1 bar/max. 10 bar...