Table of Contents
Advertisement
2.13 Remove the pump float tank
2.14 Remove the water selector
C
B
F
E
B
A
A
A
C
D
A
D
Step 1
• drain the hot water boiler as in
Step 2
•
remove the back panel as in Step 1
Step 3
• disconnect the wiring of the pump and of the float
(above the pump float tank)
• remove the descaler inlet cap
• disconnect the 3 hoses underneath the float tank
• disconnect the aeration hose
tank
• disconnect the wiring from the pump
Step 4
• push the locking pawl
• move the pump float tank
down to unlock it
• remove the pump float tank
► To remove the pump, first remove the positioning disc
to take out the pump motor.
Step 1
• drain the hot water boiler as in
Step 2
•
remove the back panel as in Step 1
Step 3
• disconnect the wiring from the motor
• disconnect the wiring from the light sensor
• disconnect the hot water supply hose
Step 4
• push the locking pawl
• move the water selector
unlock it
• disconnect the aeration hose
► Maintenance can be carried out without disconnecting
the hoses from the water selector outlet.
► Consider greasing the notch
the lid, where the rotating disc
rotates, with food-grade silicone
grease.
Step 1
of
section 2.12
of
section 2.4
on top of the float
B
forward
C
to the left and then
D
Step 1
of
section 2.12
of
section 2.4
A
B
C
forward
D
to the right and then up to
E
F
in
G
A
G
9
- Quick Links:
- Spare Parts Replacement
Hide quick links:
Advertisement
Table of Contents
