5.1.2 Installation for the Bolero 32, 33, 42 and 43
E
5.1.2a
5.1.2b
5.1.2c
5.1.2d
C
B
D
A
A
B
MDB service set
A. Distance support (4x)
B. Control interface
C. Interface cable (331.633.000)
D. Bus cable (331.103.000)
E. Bus cable (331.844.000)
Step 1
► Always unplug the machine to turn off the power
before opening it.
• remove the back panel
• remove the cut-out at the rear of the base plate
• remove the sharp edges
Step 2
• place the distance support
Step 3
• place the control interface
A
as shown
as shown
B
27