Traction Control (Tc) Disabled Warning Light; Turn Signals; High Beam - Triumph Street Cup Owner's Handbook Manual

General Information
TC Indicator Light Operation:
TC Switched On:
• Under normal riding conditions the
indicator light will remain off.
• The indicator light will flash rapidly
when the traction control system is
working to limit rear wheel slip
during periods of hard acceleration
or under wet or slippery road
conditions.
TC Switched Off:
The indicator light will not illuminate.
Instead the TC disabled warning light
will be illuminated (see page 32).
Note:
• Traction control will not function if
there is a malfunction with the ABS
system. The warning lights for the
ABS, traction control and the MIL
will be illuminated.
Traction Control (TC) Disabled
Warning Light
The TC disabled warning light
should not illuminate unless traction
control is switched off or there is a
malfunction.
If the warning light becomes illuminated
at any other time while riding, it
indicates that the traction control has a
malfunction that requires investigation.
32

Turn Signals

When the turn signal switch is
turned to the left or right, the turn
signal warning light will flash on and off
at the same speed as the turn signals.

High Beam

When the ignition is switched
ON and the high beam is selected, the
high beam warning light will illuminate.
Daytime Running Lights (DRL)
(if equipped)
When the ignition is switched
ON and the daytime running lights
switch is set to 'daytime running lights',
the daytime running lights warning light
will illuminate.
The daytime running lights and low
beam headlights are operated manually
using a switch on the left hand switch
housing.
Warning
Do not ride for longer than necessary
in poor ambient light conditions with
the Daytime Running Lights (DRL) in
use.