Table of Contents
Advertisement
Error Message
Missing IU-80
Imaging unit
Missing OS-80
Oil supply roll
Missing Toner
TD-80C (Cyan)
Missing Toner
TD-80K (Black)
Missing Toner
TD-80M (Magenta)
Missing Toner
TD-80Y (Yellow)
Missing
Charger unit
Missing paper
feeder unit
Option feeder
Left cover Open
Opt. ROM error
Press CONTINUE
Option interface
Error
##
Output tray
paper full
PJL OPMSG/STMSG
Paper jam
<Location>
Print overrun
Press CONTINUE
Replace FK-80
Fuser KIT
Care and Maintenance
Possible Cause
The imaging unit is not
installed in the printer.
The oil supply roller is not
installed in the printer.
The cyan toner developer
is not installed in the
printer.
The black toner developer
is not installed in the
printer.
The magenta toner
developer is not installed
in the printer.
The yellow toner develop-
er is not installed in the
printer.
The charger unit is not
installed in the printer.
The paper feeder unit is
not installed in the
printer.
The paper feeder's left
side cover is open.
The printer has encoun-
tered an error while
accessing data in the
option EPROM (on the
printer main board).
The printer has detected
an error on the option
interface.
The output tray has
become full.
The printer encountered
an error during process-
ing PJL commands.
Paper has become
jammed.
The printer has received
print data that is too
complex to finish process-
ing in time with the
operation of the printer
mechanism.
The fuser is worn out.
Corrective Action
Install the imaging unit
(
P. 72).
Install the oil supply roller
(
P. 82).
Install the cyan toner develop-
er (
P. 14).
Install the black toner develop-
er (
P. 14).
Install the magenta toner
developer (
P. 14).
Install the yellow toner
developer (
P. 14).
Install the charger unit in the
imaging unit.
Install the paper feeder unit.
Close it tightly.
Press CONTINUE to print the
data processed so far. Replace
the option EPROM.
Note the error code of ## and
consult your Kyocera dealer.
Remove paper from the output
tray.
Press CONTINUE to print the
page processed so far.
Remove jammed paper accord-
ing to section Removing Paper
Jam (
P. 75).
Press CONTINUE to print the
data. Install additional memo-
ry or use a lower resolution
print quality (
P. 46).
Replace the fuser kit now.
97
Advertisement
Table of Contents
