Table of Contents
Advertisement
Before You Start
CD-ROM
To prevent the CD-ROM from accidental damages:
• Do not touch or write on the
surface of the disc.
• Do not place heavy objects on the
disc.
Static Electricity Damage
To prevent static electricity damage to any of the following components, touch a grounded metal surface, such as the
printer's bare metal frame prior to touching the component.
• The interface connectors: Parallel and optional network card
• Electrical components, connectors inside the printer and any components on the optional boards (RAM expansion
board, network interface board, etc.)
• The connector pins on the optional paper feeder for the printer
Interface Cable
Always use a shielded interface cable. Use of an unshielded cable can result in radio interference with data.
Waste Disposal Method
Waste material may be dumped or incinerated under conditions which meet the applicable environmental
regulations.
2
• Do not leave the disc out of the
protective case.
• To clean the disc, hold the disc
by its edges and wipe it from the
center to the edges with a dry,
soft cloth.
• Do not leave the disc in direct
sunlight or near heat sources.
Advertisement
Table of Contents
