Table of Contents
Advertisement
Using the Printer
38
Outline for Menus
Interface menu
The Interface menu selects one of the three printer interfaces (Option is available only if
an option network interface card is installed) on which subsequent mode menu settings
become effective. The Parallel and Serial options have the second level menus as
described below.
Level 1
Level 2
Interface
> >Parallel I/F
>Serial
>Option
† Available only when the optional harddisk is installed in the printer.
Parallel Interface Mode
The parallel interface mode of this printer supports a bi-directional/high-speed mode.
Display
The parallel interface is in high-speed/bi-directional mode in com-
Nibble (high)
pliace with the IEEE1284 standard (Default).
The printer automatically changes its communication mode to the
Auto
one the host computer is using.
The parallel interface is configured according to standard specifi-
Normal
cations. Use this setting when conventional timing must be used.
The parallel interface is in high-speed mode.
High speed
After setting the interface, be sure to reset the printer or turn the power off at least once.
The new setting will be enabled thereafter.
Range
Auto
Normal
High speed
Nibble (high)
Level 3
>Baud rate
1200, 2400, 4800, 9600*, 19200,
38400, 57600, 115200
7 or 8*
>Data bits
1* or 2
>Stop bits
>Parity
None*, Odd, Eve, Ignore
>Protocol
DTR (pos.) & XON*, DTR
(positive), DTR (negative),
XON/XOFF, ETX/ACK
>Barcode mode†
Off* and On
Description
Range (*=Default)
Advertisement
Table of Contents
