Table of Contents
Advertisement
General
To prevent fire or shock hazard, do not expose this product to rain or any type of moisture.
Do not open covers and do not attempt to repair the unit yourself. Refer servicing to qualified personnel.
Power Source
• The power source voltage of this unit is listed on the nameplate. Only plug the unit into an outlet with
the proper voltage.
• When you operate this equipment, the outlet should be near the equipment and accessible.
• To ensure safe operation the AC cord supplied must be inserted into standard three-prong AC outlet
which is effectively grounded (earthed) through the normal wiring.
• The fact that the equipment operates satisfactorily does not imply that the power point is grounded
(earthed) and that the installation is completely safe. For your safety, if in any doubt about the
effective grounding (earthing) of the power point, consult a qualified electrician.
• If the plug cannot be inserted into the AC outlet, contact a licensed electrician to replace the outlet
with a properly grounded (earthed) one. Do not defeat the purpose of the grounding (earthing) plug
(e.g. using a conversion plug).
Laser Safety
This printer utilizes a laser. Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Ozone Release
Make sure that the printer is installed in a well ventilated room so as not to increase density of ozone in
the air. Since ozone is heavier than air, it is recommended that air at floor level be ventilated.
For Your Safety
Warning
Caution
Warning
Caution
Warning
ix
Advertisement
Table of Contents
