Alinx KINTEX UltraScale AXKU062 User Manual page 6

KINTEX UltraScale+ FPGA Board AXKU062 User Manual
between PC and PCIE.
3) USB Uart interface ， used for communication with the computer for user
debugging. The serial port chip adopts the USB-UAR chip of Silicon Labs
CP2102GM, and the USB interface adopts the MINI USB interface.
4) 1 channel 10/100M/1000MEthernet RJ45 interface for Ethernet data
exchange with computers or other network devices. The network interface
chip uses Micrel's KSZ9031 industrial grade GPHY chip.
5) 3 standard FMC expansion port, including 2 LPC FMC expansion ports and
1 HPC FMC expansion port, which can be connected to various FMC
modules of Xilinx or Alinx(HDMI input and output modules, binocular
camera modules,high-speed AD modules, etc. )
6) 1 Micro SD card holder, used to store operating system image and file system
7) 2 SMA external interfaces， the pins are connected to the transceiver for
external high-speed input and output signals.
8) Onboard a temperature and humidity sensor chip LM75 for detecting
the temperature and humidity of the environment around the board.
9) One EEPROM, used for IIC bus communication and storage of some
customer-defined information.
10) A 10-pin 2.54mm spacing standard JTAG ports for FPGA program
download and debugging. Users can debug and download FPGAs through
XILINX downloader.
11) 2 156.25Mhz differential crystal onboard provides reference clock for
transceiver.
12) 7 LEDs, 1 power indicator, 4 user indicators,1 pair of panel indicator.
13) 2 user keys, 1 reset key, connect to the normal IO of the FPGA.
www.alinx.com
.
6 / 51