Service Mode Explanation - Canon imageCLASS X LBP1238 II Service Manual

2. Enter the password, and click [LOGIN].
Password required for authentication differs depending on the following service mode setting: COPIER > OPTION > BODY
> PSWD-SW
PSWD-SW Password required for authentica-
setting
value
0 • Password of remote UI service mode
1 • Password of remote UI service mode
• Service mode password
2 • Password of RUI service mode
• User's system administrator ID
• Password of system administrator
• Service mode password
NOTE:
• If you do not know the password of remote UI service mode, contact the Support Dept. of the sales company.
• Password of service mode can be changed in COPIER > OPTION > BODY > SM-PSWD.
3. If you do not know the password of remote UI service mode, contact the Support Dept. of the sales company. When
finishing the operation, click [REBOOT] or [Log Out].
NOTE:
If the user logged in and then closed the browser without logging out, connection status remains as "LOGIN". If the user attempts
to log in to service mode under "LOGIN" status, exclusive control is executed so that the user cannot access service mode. In that
case, wait for a fixed time (3 minutes) from the last access to let the user be automatically logged out, or turn OFF/ON the power
of the machine to be forcibly logged out.

Service Mode Explanation

The detailed explanation of service mode is indicating the key operation (press the Apply key) for the 5-inch Touch Panel.
Note that the key operation is (Press the OK key) for the 5-line LCD model that does not have the Apply key.
Combinations of service mode settings and required passwords
tion
Authentication screen
160
9. Service Mode